RGB IKON Headlights

• 1:1 OEM LCI2 ICON design
• App-controlled RGB DRLs — any colour, set from your phone
• Every V3 feature carried over: 1:1 OEM design, DRL memory, upgraded heatsink, startup animation, brighter DRL, custom housing and the DRL desync fix
• Fixes the light-leakage and battery-drain issues of earlier generations
• Reflector-based geometric optic system
• MOT Pass and E-Mark Certified
• Plug and play across 6, 8, 9 and 10-pin configurations
• One-year warranty plus 2-year extended DRL module cover, with free compatibility-related remote coding

• V1 — the first release of the IKON headlight.
• V2 — 1:1 OEM design, DRL memory, upgraded heatsink and startup animation.
• V3 — everything in V2, plus a brighter DRL, a custom housing and the DRL desync fix.
• RGB — the fourth generation — everything in V3, plus app control, fixed light leakage and fixed battery drain.

This listing is the RGB IKON, the current generation. That's why we've dropped the version numbers — it's simply the RGB IKON Headlight.

• Pair of complete headlight assemblies, left and right — nothing to retrofit into your old housings
• All LED drivers, RGB controllers and control modules pre-installed inside the units
• Connector-specific plug for the pin configuration you select — no adapters or wiring splices
• Auto-levelling retained on compatible configurations

These headlights use a reflector-based geometric optic system, mirroring the factory arrangement — the OEM F3x adaptive LED unit is reflector-based, not a projector.

• Dipped / low beam — handled entirely by the upper angular horizontal light bars
• Main / high beam — cast from a completely separate, lower LED source inside the housing

Beam pattern: right-hand kick-up on LHD, flat beam on RHD. E-marked housing. These are aftermarket headlights, not genuine BMW assemblies. Correct beam alignment after fitting matters, so we recommend a professional alignment check.

Fits BMW 4 Series F32 / F33 / F36 and M3 / M4 F80 / F82 / F83 (2013–2020).

Compatibility depends on your original headlights, not simply your registration year.

Not sure if your car is compatible? Message us on Instagram or via the contact page with your VIN, reg or model year and we'll confirm before you order.

Check the connector on the back of your current headlights before ordering:

• 6 Pin — LCI LED headlights
• 8 Pin — Pre-LCI Xenon, non-adaptive
• 9 Pin — Pre-LCI Xenon, adaptive
• 10 Pin — Pre-LCI LED adaptive

Still unsure? Send us a photo of the connector on the back of your current headlight and we'll confirm the right option for you — please don't guess.

Colour is set from your phone rather than the high-beam flash used on our tri-colour IKONs — pick any colour, and your last selection is remembered between uses.

Set colours while safely stationary, and use only the lighting modes permitted where you drive — white is the road-legal DRL mode in the UK.

100% plug & play — no coding required for all main headlight functions. Select the version that matches your original headlights. DRLs, low beam, high beam and indicators operate through the factory harness.

Most cars display no dashboard warnings. On rare vehicles, a warning message may appear even though the main lighting functions work correctly. Free remote coding support is available to resolve these warnings.

Allow around 2 hours for professional installation of the pair and arrange a beam-alignment check. Factory adaptive cornering or swivel features depend on the selected version and vehicle; contact us to confirm those additional features before ordering.

Once fitted, the seals need roughly 10 days to settle and acclimatise to your climate and to the temperature cycling of the engine bay.

During that period, please avoid:

• Pressure washing, especially direct jets around the headlight edges and rear covers
• Prolonged exposure to heavy rain where it can be avoided

After the settling period, normal washing and everyday weather are fine.

On IP ratings: we've deliberately not put these assemblies through formal IP ingress-protection certification — that testing cost would be passed straight on to you. They are sealed to the same standard as the rest of the IKON range, and any moisture issue caused by a manufacturing defect is handled under our warranty and condensation policy below.

• Current-generation hardware — every V3 improvement plus app control, fixed light leakage and fixed battery drain
• Free compatibility coding — in-house remote technicians, during and after the warranty period
• Extended aftercare — replacement DRL LED modules at 20% of retail for up to 2 further years, on top of the 12-month warranty
• Fitment checked before dispatch — send your VIN and connector photos and we confirm the configuration for you
• UK's biggest IKON supplier — designed by VMSS, manufactured by SJC

Delivery as quick as 7 Days. Free Standard shipping to mainland UK, EU and U.S. destinations.

• Standard: estimated delivery 12–18 Days from dispatch.
• Express: estimated delivery 7–14 Days from dispatch; charges shown at checkout.
• Higher-cost destinations, including Northern Ireland and Norway, retain their applicable shipping charges.

Delivery estimates begin at dispatch. Any production lead time or advertised preorder release date applies before dispatch. Please reply promptly if we request VIN or connector photographs to confirm fitment.

IKON Headlights Limited Warranty & Extended Aftercare Policy

1-Year Limited Warranty

At IKON Headlights, we stand behind the quality and performance of our products. All IKON Headlights are covered by a 12-month Limited Warranty from the date of purchase.

What's Covered

During the 12-month warranty period, IKON Headlights will repair or replace, at our discretion, any defective component or complete headlight assembly that experiences a failure affecting its major operating functions due to manufacturing defects or component failure.

Covered functions include, but are not limited to:

• Daytime Running Lights (DRLs)
• Low Beam Function
• High Beam Function
• Turn Signals / Indicators
• Sequential Turn Signals
• LED Modules and Internal Lighting Components
• Control Modules and Electronic Components supplied with the headlight

If any of the above major functions cease to operate correctly under normal use during the warranty period, IKON Headlights will provide replacement parts or a replacement headlight assembly where deemed necessary after inspection and verification.

What's Not Covered

The following conditions are considered normal wear, environmental effects, or maintenance-related issues and are not covered under this warranty:

• Lens wear, fading, yellowing, pitting, scratches, or stone chips
• Cosmetic damage caused by road debris, accidents, misuse, or improper installation
• Water spots or surface contamination
• Minor moisture or condensation that does not affect headlight performance
• Damage caused by vehicle electrical faults, incorrect wiring, modifications, accidents, or external impacts
• Labour, installation, removal, shipping, or associated costs unless otherwise agreed

Condensation Policy

Condensation can naturally occur within headlight assemblies due to changes in temperature and humidity. As such, condensation is generally not covered under warranty.

However, if excessive moisture accumulation is determined upon review to be the result of a manufacturing defect, IKON Headlights may authorise a repair or replacement at its sole discretion following inspection.

All condensation-related claims are subject to review and approval by IKON Headlights.

Warranty Claim Process

To submit a warranty claim, customers must provide:

• Proof of purchase
• Order number
• Photographs and/or videos demonstrating the fault
• Vehicle details if requested

IKON Headlights reserves the right to request additional information before approving any claim.

Extended Aftercare Programme — DRL LED Modules Only

Following the expiration of the 12-month warranty period, IKON Headlights offers an Extended Aftercare Programme covering DRL LED modules only, for up to an additional 2 years.

Aftercare Benefits

During the Extended Aftercare period, replacement DRL LED modules can be purchased for 20% of the component's current retail price (an 80% discount from full retail price).

This is the only component covered by the programme. Availability is subject to stock levels and product compatibility.

Exclusions

The Extended Aftercare Programme does not extend or renew the original warranty and does not cover:

• Any component other than the DRL LED modules — including control modules, indicator and sequential signal modules, and other internal lighting components
• Complete headlight replacements
• Lens wear or cosmetic damage
• Accidental damage
• Water ingress caused by impact or improper installation
• Labour or installation costs

IKON Headlights reserves the right to inspect, review, approve, deny, repair, or replace any product covered under this policy. This warranty applies only to the original purchaser and is non-transferable unless otherwise agreed in writing.

Dashboard Warning Support

No coding is required for the main lighting functions. Most vehicles show no dashboard warnings; rare warning messages can be resolved with free remote coding support from VMSS, available during and after the warranty period. If a main lighting function does not operate correctly, contact our support team for diagnosis and warranty assistance.

14-Day EU Right of Withdrawal & 30-Day Satisfaction Guarantee

14-Day EU Right of Withdrawal

In accordance with applicable consumer protection regulations, customers located within eligible European jurisdictions have the right to withdraw from their purchase within 14 calendar days of receiving their order without providing a reason.

To exercise this right, customers must notify IKON Headlights in writing within the 14-day withdrawal period.

Returned products must:

• Be in their original condition.
• Include all supplied accessories, modules, wiring, and packaging.
• Show no signs of installation, modification, damage, or misuse.
• Be suitable for resale as new.

Once the returned item has been received and inspected, a refund will be processed to the original payment method. Original shipping charges may be non-refundable where permitted by law.

Customers are responsible for return shipping costs unless otherwise required by applicable consumer legislation.

30-Day Satisfaction or Money-Back Guarantee

We are confident in the quality and performance of IKON Headlights. If you are not completely satisfied with your purchase, you may return your product within 30 days of delivery for a refund, subject to the conditions below.

To qualify for the 30-Day Satisfaction Guarantee:

• The product must be returned within 30 days of delivery.
• The product must not be physically damaged, modified, or abused.
• All original components, accessories, and packaging must be included.
• Customers must contact IKON Headlights before returning the product to obtain return authorisation.

Prior to approving a return, our technical support team may attempt to resolve any issues through troubleshooting, vehicle coding assistance, or installation guidance.

If a return is approved and the product is received in acceptable condition, a refund will be issued to the original payment method.

The 30-Day Satisfaction Guarantee is provided in addition to any statutory consumer rights and does not affect your legal rights under applicable consumer protection laws.

IKON Headlights reserves the right to refuse returns that do not meet the conditions outlined above.